Skip navigation

Tag Archives: profoto

With the continued increase in popularity of motion capture, more and more photographic lighting companies are expanding their lines and offering continuous lighting products.  Profoto is one of a handful of respected lighting manufacturers known for their flash units to not only offer a line of tungsten continuous lights, but also HMI lights as well.  Continuous lighting tools are not new for Profoto, as they marketed both a HMI and a tungsten unit, several years ago:  But the new products, the ProDaylight 800 Air and the ProTungsten Air, are not a simple retooling, but represent a major rethinking and development.  For the photographer who is shooting both stills and motion, particularly in a studio location or on a set, these lights expand the possibilities of modifying continuous light with the broad range of Profoto light shapers that they have been using with flash; both units are compatible with Profoto’s zoom reflector system, which gives one the ability customize the light shaping effect. 

To read the entire entry, click here!

Advertisements

hensel-kit-1If I were in the market for a 1200 w/s battery pack today, there is no doubt in my mind that the Hensel Porty Lithium 12 would be a top contender.  I reached this conclusion after having the opportunity to spend some time with the Porty Lithium 12 thanks to the folks at Hensel USA, and Fotocare in New York.  For the location photographer, there is much to like about the Porty Lithium 12:  It is one of the lightest 1200 w/s battery powered units weighing in at 13 lbs and that is with the battery on-board.  The unit has outlets for two heads which can be powered 1:1, 1:2 or 1:3.  There are seven f-stop power levels (a six f-stop range) which is adjustable in 1/10 increments or in full stops.  The Porty Lithium 12 is also among the fastest 1200 w/s battery generators with recycle at full power in 1.95 seconds, placing it a mere .15 seconds behind the heavier, more expensive Profoto B2.  With the Porty Lithium 12, Hensel has bested the performance or its own popular Porty Premium with respect to three aspects which are important to photographers:  Weight, size, and performance. 

 If you are considering the Porty Lithium 12, the one light kit seems to be the most attractive and “cost-effective” option.  In addition to the generator (which has a built-in Hensel Strobe Wizard radio receiver) and battery, the kit includes:  One Hensel EH-Pro Mini 1200P flash head; a fully detachable head cable; a 7” reflector; one light stand; the Porty Lithium Quick Charger; and a soft wheeled case.  The flash head has a 65 watt modeling lamp which puts out the equivalent of 120 watt incandescent bulb.  As with most battery generators, the lower powered modeling lamp will be useful under some circumstances and sub-optimal in others.  The kit comes with a Hensel Strobe Wizard Plus Transmitter which can be mounted on the camera to facilitate flash triggering, as well as being used to adjust flash output and modeling lamp intensity.  While the current MAP of the Porty Lithium 12 Kit is $4450USD, you should check with Hensel dealers for street pricing and availability, as availability may vary by dealer.  A complete list of dealers is available on the Hensel USA site.

 hensel-porty-l-12The Porty Lithium 12 is well made.  The fit, finish and extent of “environmental” sealing/protection is excellent.   The controls are as intuitive as it gets.  The squat profile of the unit and wood handle suggest it is substantial in weight, but when you pick it up don’t be surprised if you marvel, as I did, at how light the unit actually is.  I was also keenly aware at the lightness of the Pro Mini 1200P head.  Hensel officially list the weight of the head at 5.7 pounds, but that includes the 16 foot cord. The head alone weighs in the vicinity of three pounds.  Hensel wisely designed the unit with a detachable cord, which is of great assistance for packing and storage, and is a feature I would like to see more manufacturers adopt.  The head comes with a clear dome and a protector cap.  The light is clean and in my opinion on par with that of other premium brand products.  In my testing, the units recycled as fast as Hensel claims at full power.

 One of the most intriguing aspects of the Hensel Lithium 12 is the battery.  Hensel is the first lighting manufacturer, to my knowledge, to offer a lithium battery in a portable generator.  In order to understand the significance of the lithium battery, one only has to compare the battery of the Porty Lithium 12 and the older Porty Premium Plus:  At full power, Hensel estimates about 230 pops for the lithium battery vs. 250  pops for the Porty Premium Plus battery.  Let’s not split hairs over 20 pops and call them roughly equivalent.  hensel-battery1The Lithium 12 battery/cassette weights 2.5 pounds; the Porty Premium battery and drawer weighs nearly 9 pounds.  For the traveling photographer who is concerned about weight of gear, the weight differential, particularly if one needs to carry multiple batteries, is significant.  If the weight of the Lithium 12’s battery is the upside, the downside of the lithium technology is that the batteries are expensive:  A second lithium battery/cassette runs over $500 USD.  To be fair, the price of an extra Hensel lithium battery/cassette (2.5 lbs) is in the same range as a second battery and drawer (11.4lbs) for a Profoto B2.

The Hensel Porty Lithium 12 may become an even more versatile tool for photographers if the long-rumored AC adapter becomes available this Fall.  For some an AC/DC Porty Lithium 12 may become an all around lighting solution for their shooting needs.

 I should mention that Hensel also makes the Porty Lithium 6, which is a 600w/s unit.  Given the fact that there is only a $330 USD difference between the price of the Lithium 6 and Lithium 12 generators, I personally would be hard-pressed to consider the less powerful unit as the Lithium 12 offers more “pop” for the buck!  Hensel also offers a robust line of light shaping tools, many of which are attractively priced.

 In order to give photographers an opportunity to experience all that the Porty Lithium 12 offers, Hensel USA has been making several two light kits available for rental through their dealers across the country.  The Porty Lithium 12 Kit has been in New York at Fotocare, and in Los Angeles at Samy’s.  You can check the Hensel USA Website for the current location of the kits for rental or contact Sharon or Mark Gottula through the Website for additional information.

 

Note:  The images displayed are of the two head rental kit and may show and/or include items that are not a part of the one head kit available for purchase.

briese-focus77-image-2 

 Last month, Hamburg based Briese Lichttechnik established Briese NY, its first U.S. division office.  I recently sat down with Gerd Bayer, who heads the office to talk about Briese, and to get an up close and personal look at some of their products.It doesn’t take a whole lot to figure out what makes the Briese light different – and that’s before you even plug it in.  You may see deflectors, pencil or stick type lamps and large parabolic reflectors among other companies’ products, but none put them together the way that Briese does.  The result is a unique way of distributing and controlling light.  Briese was the company at the forefront of the large, umbrella style parabolic movement.  With seven sizes available today, no one comes close to matching the range of focusable parabolics offered by Briese.  The other thing which makes the Briese Focus unique is that it is essentially an exoskeleton with a reflective surface underneath.  The beauty of this arrangement is that since the structure is on the exterior there are no ribs or spreader assembly compromising the interior.

 briese-focus77-image1

 Gerd already had a Focus77 set up when I arrived at the Briese NY office on West 27th Street.  As I watched him move the flash head utilizing the focus tube or wand from the flood to the spot position and back (near the outer edge of the umbrella inward and out) the change in the position of the light on a subject is very much like watching a Fresnel being opened up or closed down. 

briese-focus77-image-3     briese-focus77-image4

  The linear flash tube which the Briese Focus uses seems to produce a  directed, even and efficient light.  I’m going to address one thing right now as a user of the wonderful Elinchrom Deep Throat Octa which is a little larger  than the Focus77 because someone is bound to ask:  Inspite of being similarly shaped, the differences in the shape of the flash tubes, the interiors, as well as the ability to move the Briese flash tube, nets differences in  lighting patterns and characteristics.  With the addition of diffusion materials on both however and depending on where the Briese flash  is positioned, I believe the differences may be narrowed.   The Focus100, which was not available, and the Deep Octa are essentially the same size.

 The components of the Focus system excluding the power pack and a light stand include:  The Focus umbrella, the flash tube, shield and deflector: the focus tube/wand, the flash/lamp base, the mounting assembly, the set up assist/storage post, a breakdown ring and a transport bag.  Gerd cautioned me that one of the most important things to remember in handling the Focus is not to pull on the ribs.  He says that the most common repair he sees is exterior rib breakage, and usually because of someone trying to open or close the Focus improperly.  If you place the collapsed umbrella on its end, insert the set-up post into the ring opening and apply a little pressure, the Focus takes shape.  The breakdown process while different is just as simple:  You place the breakdown ring on top of the exterior rim of the Focus, insert the set up post, apply some pressure and the umbrella collapses. Perhaps because I am a bit of a “gadgeteer,” I did not find the set up/breakdown process at all intimidating, but I do think that I would  have felt differently if a Focus220 or 330 had been in front of me; where some things are concerned, size really does matter!  I can certainly understand how some people might find the set up/breakdown process different enough to be a little too involved or worrisome.

 The Briese Focus comes in one finish: hard  silver.  If you want to alter the characteristics of the resulting light, diffusion panels can be secured to the tips of the Focus.  A soft grid can also be attached to the tips for another level of spread control.  I pressed Gerd, as to what type of material is used on the interior surface of the Focus.  I had heard that it was Kevlar;  he smiled and indicated Briese does not disclose that, but went on to say that the material is special because the Focus range is also compatible with the Briese line of tungsten and HMI products and has to be able to withstand substantial heat.  All in all, I was impressed with how well made the Focus components are, and how seamlessly they fit together.

 The Focus77 was attached to an 800w/s multi-voltage, Briese Yellow Cube Pack.  The 800i weighs about 17 pounds and when the lid is on —  you guessed it — is a yellow cube with a carrying strap.  This obviously is a real departure from the typical black or grey box one usually sees in the studio.  The air cushioned sliders on the bottom of the pack are both a thoughtful and utilitarian touch.  The pack has outlets for 2 heads.  Interestingly while I wasn’t intimidated by the Focus77, the 800i was a different story.  There are a lot of pressure pads for flash and modeling light control.  I’m confident that if I spent time with the pack, that its operation would become second nature, but my initial reaction was “Oh my God!”

 briese-800i-top-view

With the Briese pack, the shortest flash duration is achieved at maximum power.  A four-stop range is the price one pays for the multi-voltage capability of the “i”series packs.  The “e” series packs which are designed for use in Europe and are 220-240v have a seven-stop range.  While the lack of familiarity with the pack controls can be overcome, for some photographers, the four-stop range of the ‘i” packs may be regarded as too limited.  Hopefully this power adjustment range issue will be addressed in future products and/or updates.  Given that the “i” series power adjustment range is not as robust as other premium brand generators, it was interesting to watch how making power and focus adjustments can work hand in hand in with respect to light output.  The Briese generators start at 400w/s and go up to 6400w/s.

 Among the new products which Briese has introduced is the “Focus Help” (FH,) a remote controlled unit which will tilt the Focus umbrella as well as move the focus tube in and out.  For users of the larger Focus models, the FH will allow precise adjustment and fine tuning of the lights after they have been positioned.  This device is clearly an assistant’s dream.  While the Focus may be the product that people most readily associate with the Briese name, Gerd made it clear that there are several other stellar modifiers including a line of strip boxes.  Like the Focus, the Strip is essentially an exoskeleton lined with reflective material.  There are no ribs or wands inside the reflective surface area.  The interior appears to be softer silver than that found in the Focus.  The Strip comes in a few different sizes and there are louver and  baffle options available to provide additional control.

briese-strip briese-focus,-800i-pack-and-collapsed-strip

Briese products are available at a couple of studio here in New York for in-studio and location use:  Among them is Milk Studios.  I was told by one of the equipment gurus that “We [at Milk] like the product and the client demand is definitely there.”

 While I did not press Gerd about future product development, we did talk about growth.  He indicated that “Continuous lighting and HMI specifically is definitely a growth area.”  I was not surprised by his comment:  As motion and still applications continue to converge and offer visual continuity across formats, clients may be able to realize significant economies of scale in being able to handle both of these needs on one set, at the same time.  As of now his sense is that the Briese flash products are used more in New York for still work as opposed to Los Angeles, where the  use of Briese continuous light products is driven by motion work.

 Ken Allen of Monster Lighting, a professional film and video lighting house in Los Angeles has handled Briese products for approximately a year now, and says of the system, “It’s just a great product.”  Ken confirmed that the light weight of the Briese continuous lamp fixture is an advantage in using and placing them on sets.

 The one topic that I have held off mentioning until now is price.  There are a couple of reasons for this:  I wanted the focus of this entry to be on the Briese products which personally, I find intriguing.  The target audience for these products is not the casual shooter, or the guys going at it on Internet forums as to which brand of lighting is better or trying to define what constitutes “professional lighting.”  Let’s call it like it is:  The market for Briese products includes high end commercial applications and photographers who have the client base and budget to justify or warrant the expense.   They must feel that the Briese product will perform on the set as they demand and give the image the look they want and need.  In my opinion, products like the Profoto 8Air, the new Profoto Giants, the Broncolor Scoro packs and Paras are aimed at the same markets and photographers make similar decision about there use based on their  performance needs and desired look..  The only point here is that Briese is not alone in this regard.  Let’s also acknowledge that many photographers rent this type of  equipment when they need it, as opposed to buying it outright.  You don’t find the Briese product in the popular virtual or brick and mortor  stores, but they are found in a growing number of studios and specialty rental houses.  I also did not want the discussion of expense to drive this entry because many times discussions  on expense and value,  just as discussions about “quality of light,” tend to be both subjective and relative. 

But for those who are curious about the cost of ownership of the Briese kit that Gerd had set up in the office, here are some familiar products or services for which the price range, in U.S dollars, is comparable:  One (1) 2009 Toyota Yaris; or a brand new Phase One 645 camera with a P30+ back and 80mm lens kit; or six (6) 17 inch 2.8GHz Mac Book Pros; or two (2) Nikon D3x camera bodies; or one (1) Canon 5d MarkII and the seven (7) fastest L prime lenses from 14mm through 200mm; or a face lift and tummy tuck.

 For more information on Briese, their products, and availability,  or about Milk Studios and Monster Lighting, click on the embedded links in this entry.

wireless-1I have been intending to write about the new PocketWizard products for the past several weeks, but every time I’ve scheduled an outdoor shoot, we’ve been rained out. Hopefully the weather will cooperate this weekend and I will be able to finally shoot the project that has been thrice postponed and put the MiniTT1 and FlexTT5s through their paces as I normally would use them and share my experience. I’ll warn you now since I will be shooting on the streets of New York, that I won’t be going for distance records with respect to flash placement.

All has not been lost during this wet spell: LPA Design has been busy updating firmware which addresses issues and enhances the performance of the new PocketWizard products; and I added the Profoto D1 Air 500s to my lighting arsenal. The very favorable impression I had of the D1 Airs when the MAC Group made them available for my review in March continues.

Over the past week I was assessing my lighting equipment – Profoto packs with built in PocketWizards, a couple of MultiMax units, a MiniTT1, a couple of FlexTT5 units , a couple of current generation Canon Speedlites, the D1 Air 500 units and last but not least, a Sekonic 758 meter. I found myself trying to make sense of all this stuff and how I could get it all to work best together.

Since I like the low profile of the MiniTT1, it has become my PW apparatus of choice on top of the camera. I set configuration 1 in the PocketWizard utility to allow for Control TL and triggering my MultiMax units and Profoto packs on the Standard/Legacy Channels. For configuration 2, I disabled ControlTL, and set the receiving channel on the Flex units to match the receiving channel for MultiMax units and the Profoto packs.

I hooked up a couple of speedlites to the FlexTT5s put the Mini on the camera and ControlTL worked flawlessly–in the same room, down the hallway and two rooms away. I then hooked up my Profoto packs and in configuration 1, they fired along with the Canon Speedlites. This served as  confirmation that I had set the ControlTL and Standard/Legacy Channels up correctly.

I decided to add a single D1 Air 500 to the mix. I placed the Air Remote in the shoe of the camera mounted Mini, turned the Mini on, then the Air Remote and last the camera.  I took a shot. In configuration 1, with the Air Remote seated on the Mini, the D1 Air fired along with the Canon flashes and the Profoto packs.  I got adventurous and added the Sekonic 758 Light Meter to the equation. One of the perceived drawbacks of the Profoto Air System is the lack of wireless triggering compatibility with their products with Built-in PocketWizards as well as with the PW equipped Sekonic meters. I already knew from earlier experimentation that ControlTL had to be disabled and the Speedlites had to be in manual mode in order to be metered with the Sekonic. So I changed the Flex units setting to configuration 2, and left the Air Remote seated on the Mini on board the camera.  When I triggered the Sekonic meter,  everything fired except the D1 Air!  As I was getting ready to take the setup down, it occurred to me that since the Mini TT1 was a transmitter, it was not receiving the signal from the Sekonic, whereas the Flex units as transceivers were getting the signal. So I mounted the Air Remote on a Flex unit and triggered the Sekonic meter. Yes, the D1 Air fired with the other lights. I then removed the Mini from atop the camera, and placed the “Air Remote /FlexTT5” combo on camera and triggered the Sekonic: the D1 Air fired again. And this photographer became one very happy camper because I discovered that I can have  the  contol capability of the Profoto Air system and full PocketWizard triggering functionality right on the hot shoe of my camera.

Footnote: I was about to hook the Air Remote up to a MultiMax to check whether that combination would work with the Sekonic meter, when I realized that my two dogs who had been exceedingly well behaved during my testing session, were having a good time chewing up the miniplug connector cable!

Last fall, I got a taste of “rare air” at Photo Plus Expo in New York, courtesy of Profoto and their magnificent Pro-8 Air system.  I refer to it as “rare air” because its performance and price point put it in the stratosphere for many photographers and small studio owners.  While the blazing speed was impressive, the most interesting aspect of the Pro-8 Air system to me was the switch from the analogue controls of the Pro-7 series to digital and the wireless control capabilities that evolved as a result.  I left the show wondering if and when we might see “Air” in other Profoto products.

 

Last month, with the announcement of the D1 monolights, Profoto has made “Air” available to a broader audience. profoto d1 500 air It is also an indicator that the Pro Air system is becoming a standard wireless protocol for Profoto products.  As a user of Profoto battery packs and ComPacts, I was particularly interested in the D1 system as the specs seemed to address my issues with the current generation of monolights.

 

If you have ever worked with monolights on a boom or placed high up, you know that making manual adjustments to output can be difficult and time consuming.  The Profoto D1 Air system addresses this problem with the Air Remote which literally puts control of the lights in your hand or in the camera hot shoe.  No more raising and lowering light stands to fine tune the power or to adjust the modeling lamp.  While Profoto is not the first major lighting manufacturer to move in this direction, it is a welcome move nevertheless!

 profoto air remote

My other issues with the current ComPact units are size and weight:  My ComPact 600 from the end of the unit to the tip of the glass cover measures a whopping 16 inches long.  The D1 is nearly 5 inches shorter, is lighter, and includes an integrated handle and reflector.  While the power may vary, the housing of the D1 units is the same, so if you are shooting with a 250 or a 1000 w/s unit, the physical dimensions of the units are identical, but weight will vary.  The D1s also offer a greater degree of lighting control than the ComPacts:  7 stops (500-7.8w/s) adjustable in whole stops or in 1/10 increments versus 5 stops (600-37.5 w/s) adjustable in 1/8 increments; shorter recycling times and for the international traveler, they are multi-voltage.

 

One of the biggest concerns I had with respect to the D1s design was the built-in reflector.  With a 77 degree spread, I worried that light quality/quantity would be compromised especially when using a beauty dish, one of the giant parabolic reflectors, or the magnum reflector.  The folks at Profoto must have anticipated this reaction because there is an optional dome-shaped glass cover available that should give the additional spread that many of us are use to.  Since I did not have access to the dome, I cannot comment on the spead differential.  I suspect that transport and handling concerns may have influenced the decision to go with a built-in reflector.

 

I found the D1 well-designed, well-built and extremely easy to use.  The controls are straightforward and intuitive.  Now the D1s come in several flavors: the big question if you are considering the 250 or 500 watt/sec units is whether “to Air or not to Air?” The 1000w/s unit only comes with Air.  Personally, I would have to have Air.  Much of a photographer’s work is about control, consistency, and efficiency; all benefits of the Pro Air system.  Users of the Pro-8s may find the D1s attractive as they are fully compatible and controllable with the same Air Remote and optional software.  The optional Air Sync makes it possible to trigger non air equipped packs and monolights.  Profoto also has indicated that an external battery will be available, possibly as early as this summer, as an option for the D1 system making it a potent tool for both studio and location work.

 

The D1s are not priced for the faint of heart.  If you have a limited lighting budget, at $1179 for a single 500 w/s Air unit, (the Air Remote must be purchased separately) or $2679 for the D1 500 Air Studio Kit (which includes:  two D1 500 Air units; a case; two light stands and umbrellas; and the Air Remote), the D1s may not be a viable option.  If, however, you like or use Profoto generators and the Profoto Light Shaping System, or use criteria other than or in addition to absolute cost to determine value, the D1 Air units may be a very attractive and versatile addition to your lighting arsenal.

 

 

While I believe the D1s have tremendous appeal on their own and in conjunction with the Pro-8 system, as well as with more products as the Pro Air “stable” expands, for many users of Profoto products like myself, with built in Pocket Wizards, there are some interesting considerations, none of which are product killers or insurmountable.  Unlike the Pro-8, there is no option for a built in Pocket Wizard with the D1s.  If I were to use a D1 500 Air  in conjunction with Pocket Wizard equipped Profoto products, I would use the Air Remote to adjust power, and plug a Pocket Wizard in to trigger the lights.  Another option, but in my case not a cost effective one, would be to purchase a couple of Air Syncs to trigger the non air equipped lights and generators.  And what about metering?  My Sekonic light meter works perfectly with the Pocket Wizard set up.  If I were opting to shoot only with the D1 Air units, I would  have to set the light meter to “cordless flash mode” and make sure the lights are triggered with the Air Remote within the 90 second timeframe.  These are not the most seamless solutions, but they are workable.   Profoto does not appear  to be resting on their laurels, so the options and considerations may change.

 

For more information on the Profoto D1s and other Profoto products, click.here.

 

Update:  After purchasing the D1 Airs in April, I discovered that it is possible to  mount the Air Remote to a PocketWizard Flextt5, and fire the D1Airs and my PocketWizard equipped packs  simultaneously!  Additionally, in this configuration, the Sekonic Meter with the PW module will also trigger the D1 Airs.  To read more about this, check out my May 5, 2009 entry.