Skip navigation

Tag Archives: still and video lighting

coollights

One of the reasons I decided to undertake a series on lighting for still and motion at different price points is to underscore the fact that there are lighting solutions for every wallet and pocketbook.  While a lot of the outdoor footage which is being shot with HSLR/HDSLRs which include cameras such as the canon 5D markII  and the 7D and Nikons D90 and D300s, makes use of available/ambient light, indoor motion recording often requires a different approach.  While some of the products offered by the big names in professional lighting for stills and motion may cost more than many people can or are willing to spend, there are lots of options for those just getting their feet wet experimenting with the dual mediums as well as for the “seasoned” dual medium shooter.

 For the under $500 off-camera solution while high power, low heat production, and low wattage were still priorities, I also wanted a solution that had multiple power options.  I decided that I wanted to go with LEDs.  The bad news was that I could not find a solution in my favorite brick and mortar stores in the target price range.  The good news is that I found what I was looking for online!  My search led (no pun intended) me to, Nevada-based, Cool Lights USA.

The lighting unit of choice was their CL-LED600.  I choose the 5600k flood model with a 60 degree LED beam angle, over the spot (40 degree LED beam angle) and 3200k degree models.  I thought the 20 degree beam angle advantage that the flood had over the spot would produce a broader and more flexible light for my shooting needs. 

The Cool Lights Website indicates the LED600 has a lot going for it and after using it, I have to agree that it does.  The unit is approximately 10”x10”x3.25” and weighs about three pounds.  The unit is shipped with a set of barn doors mounted, which increases the weight to 6 lbs or so.  The LED600 is solid, well-made, well-finished, and offers a lot of lighting control:  There is a master switch and a dimmer as well as five bank switches which allow you to select and brighten or dim various bank combinations from zero to 100% of the fixture’s LEDs.  While the CL-LED600 ships with an AC cord, its rear panel has a 4 pin XLR outlet, which allows the unit to be run off a 12-18 volt battery.  As an alternative, you can purchase an optional battery adapter plate, either Anton Bauer or Sony “V” mount, and attach the appropriate battery directly to the rear of the unit.  Three power options: how cool!  This makes the CL-LED600 a versatile tool. 

According to Cool Lights’ Richard Andrewski, the CL-LED600 puts out the equivalent of a 650 watt incandescent light but uses around 50 Watts of power.  As you can see from the images below, the unit does indeed put out a lot of light.

cool-lightsbw-copy cl-led600-as-main-flashpoint-camera--left-as-fill-2

In addition to the AC cord and barn doors, the unit also ships with a shoulder bag, directions, and four filters for use in the built-in filter holder:  Two minus green filters of different strengths, a full CTO filter and a diffusion panel. 

For those looking for a lighting solution which offers a lot of power, tremendous control, and AC/DC flexibility, the CL-LED600 is definitely worthy of consideration.  For more information on the CL-LED600 visit:   http://www.coollights.biz/

Advertisements
As more and more H(d)SLR cameras hit the market, there will be a greater interest in and demand for continuous lighting solutions that can be used for both still and motion capture.  I decided that I wanted to look at some options available at different price points for AC and/or DC use.  I also decided to look only at off camera solutions.  I removed incandescent lights from consideration as I wanted high output, low wattages and minimal heat.  I established three thresholds for solutions:  Up to $100; up to $500; and up to $1500.  Rather than covering several lighting options in one post, I will write about the solutions separately between now and the middle of November. 

 I decided to explore an under $100 lighting solution first.  I was a bit skeptical as a people shooter that I would find anything I felt comfortable with in this price range.  After doing a fair amount of searching, I settled on a couple of $42USD, Adorama, Flashpoint brand umbrella-style soft boxes and cool fluorescent bulbs.  In fact, I added $30 to the budget and bought three “Kits.”

flash-pt1Basically a “Kit” consists of a 20 x27’ soft box built around a light bulb:  Take the bulb out, remove the cord, collapse the unit and you are ready to go.  Now let me “be perfectly frank;” for $42 you shouldn’t expect and don’t get premium brand construction or finish:  The plastic base plate assembly is not the most elegant solution in terms of opening for mounting to a stand and/or tightening it when mounted, and I found myself struggling a bit to get the baffle evenly attached to the box as well.  What you do get for $42 however, once you get the light attached to the stand and the baffle on snugly, is a light that works overtime and the comfort of knowing that if you damage the bulb or break the box, replacing either won’t set you back a king’s ransom.  And most importantly, you get a light which can be used for video or still work and does not generate the kind of heat that can make a set uncomfortable.  If there are drawbacks, the biggest is that the light is not dimmable.  One solution might be to buy a few bulbs of different wattages for flexibility or place additional diffusion material on the front.  Another drawback is that even with the baffle, there is a “hot spot” in the center of the box resulting from the bulb: You may see it in the catch-lights.  The biggest downside is that the 85 watt “spiral” bulb is huge!  If you buy these lights, feel free to discard the box the entire assembly ships in as the soft box, cord, baffle and adjustment lever come in a nice black canvas case, but you will want to keep the box and form the bulb comes in.  Drawbacks not withstanding, yes indeed, I love these lights!flash-pt-5

flash-pt-7 

According to Adorama, the 85 watt bulb included in the kit I purchased roughly puts out the equivalent of a 480 watt tungsten bulb.  My conclusion—it is indeed close to that.  Adorama also says the temperature of the bulb is 5500K.  That may indeed be the temperature of the bulb, but my unscientific eyeball test felt that the light in the silver box with baffle mounted was cooler than 5500k, so you may want to custom white balance for the best result.

The kit currently on the Adorama site comes with a 70 watt bulb and sells for $39.95. The only difference between the “Kits” I purchased for $42 and the one currently listed is the bulb.  The 70 watt bulb according to Adorama, puts out the equivalent of a 350 watt incandescent light.

I feel this is a wonderful product worthy of consideration for those seeking to light for motion and still work at a most compelling price.

© 2009 bkatkinson     © 2009 bk atkinson

^ Stills  captured during a video shoot using a single Flashpoint “umbrella-style” Soft Box Kit.

 I want to make a few general comments in closing: First, for those of you who own flash lighting equipment already, if you try using those modifiers with continuous lights, make sure they are properly ventilated and heat rated as a lot of light modifiers which are routinely used for flash applications are not made to be used with continuous lighting and particularly those that generate a lot of heat.  Going forward, if you are going to be shooting with flash and continuous lights and want to use the same modifiers, you may want to make sure that you buy modifiers that are appropriately rated.  The second point I want to make is that even though some lighting is considered “cool” the term cool may be relative:  Be careful handling fixtures and bulbs, especially immediately after turning them off.  If you are shooting with fixtures that require installation and removal of bulbs, store and transport them with care. 

Glossary:

H(d)SLR stands for “hybrid digital” or “high definition” single lens reflex cameras -you decide which.  This is what I call cameras such as the Canon 5dMarkII and 7D, the Nikon D90, and the D300s, and other DSLRs that are video capable.