Skip navigation

Tag Archives: technology

wireless-1I have been intending to write about the new PocketWizard products for the past several weeks, but every time I’ve scheduled an outdoor shoot, we’ve been rained out. Hopefully the weather will cooperate this weekend and I will be able to finally shoot the project that has been thrice postponed and put the MiniTT1 and FlexTT5s through their paces as I normally would use them and share my experience. I’ll warn you now since I will be shooting on the streets of New York, that I won’t be going for distance records with respect to flash placement.

All has not been lost during this wet spell: LPA Design has been busy updating firmware which addresses issues and enhances the performance of the new PocketWizard products; and I added the Profoto D1 Air 500s to my lighting arsenal. The very favorable impression I had of the D1 Airs when the MAC Group made them available for my review in March continues.

Over the past week I was assessing my lighting equipment – Profoto packs with built in PocketWizards, a couple of MultiMax units, a MiniTT1, a couple of FlexTT5 units , a couple of current generation Canon Speedlites, the D1 Air 500 units and last but not least, a Sekonic 758 meter. I found myself trying to make sense of all this stuff and how I could get it all to work best together.

Since I like the low profile of the MiniTT1, it has become my PW apparatus of choice on top of the camera. I set configuration 1 in the PocketWizard utility to allow for Control TL and triggering my MultiMax units and Profoto packs on the Standard/Legacy Channels. For configuration 2, I disabled ControlTL, and set the receiving channel on the Flex units to match the receiving channel for MultiMax units and the Profoto packs.

I hooked up a couple of speedlites to the FlexTT5s put the Mini on the camera and ControlTL worked flawlessly–in the same room, down the hallway and two rooms away. I then hooked up my Profoto packs and in configuration 1, they fired along with the Canon Speedlites. This served as  confirmation that I had set the ControlTL and Standard/Legacy Channels up correctly.

I decided to add a single D1 Air 500 to the mix. I placed the Air Remote in the shoe of the camera mounted Mini, turned the Mini on, then the Air Remote and last the camera.  I took a shot. In configuration 1, with the Air Remote seated on the Mini, the D1 Air fired along with the Canon flashes and the Profoto packs.  I got adventurous and added the Sekonic 758 Light Meter to the equation. One of the perceived drawbacks of the Profoto Air System is the lack of wireless triggering compatibility with their products with Built-in PocketWizards as well as with the PW equipped Sekonic meters. I already knew from earlier experimentation that ControlTL had to be disabled and the Speedlites had to be in manual mode in order to be metered with the Sekonic. So I changed the Flex units setting to configuration 2, and left the Air Remote seated on the Mini on board the camera.  When I triggered the Sekonic meter,  everything fired except the D1 Air!  As I was getting ready to take the setup down, it occurred to me that since the Mini TT1 was a transmitter, it was not receiving the signal from the Sekonic, whereas the Flex units as transceivers were getting the signal. So I mounted the Air Remote on a Flex unit and triggered the Sekonic meter. Yes, the D1 Air fired with the other lights. I then removed the Mini from atop the camera, and placed the “Air Remote /FlexTT5” combo on camera and triggered the Sekonic: the D1 Air fired again. And this photographer became one very happy camper because I discovered that I can have  the  contol capability of the Profoto Air system and full PocketWizard triggering functionality right on the hot shoe of my camera.

Footnote: I was about to hook the Air Remote up to a MultiMax to check whether that combination would work with the Sekonic meter, when I realized that my two dogs who had been exceedingly well behaved during my testing session, were having a good time chewing up the miniplug connector cable!

Advertisements

If you want to seriously stabilize your Canon 5d Mark II or Nikon D90 (referred to as “hslrs,”) a tripod and/or monopod along with a fluid head are, at a  bare minimum, essentials. They are available in different configurations and at various price points.  A critical consideration is making sure the tripod/monopod and the head can support the camera and lenses that you are going to mount.  Be sure to check the load capacity of the equipment you are considering.  While tripods and monopods address relatively stationary shooting where you may primarily be interested in panning and tilting movements and you have the space to use them, they do not address dynamic shooting conditions or shooting in tight spaces.  And that’s when you need to look at the portable stabilizing solutions.

 

Just like with tripods/monopods and fluids heads, there are portable stabilizing options to fit every budget.  Personally, I did not want to wear a belt, vest or any contraption which made me look like I was in traction while trying to stabilize my hslr.  In addition to keeping the camera steady, I also wanted to keep my wallet steady.  After giving the matter serious consideration, I arbitrarily set my budget for a portable stabilizing solution at $300 maximum:  Too much over that amount and I felt that the solution would be overkill since my primary usage for both cameras is  still work.  The solution had to be easy to transport; easy to set up and break down; and just as importantly, easy to use.  The stabilizer also had to be able to support the camera body and substantial telephoto lenses.  I was aware that this last consideration might knock out some of the support products aimed at the palm sized camcorders.  My last requirement was that I had to be able to physically handle the product before purchase.  The “video virgin” in me was driving this requirement.

 

After doing a lot of research, I found two products that piqued my interest, and were readily available here in New York for purchase.  The Manfrotto Fig Rig which I found at Calumet Photographic and the BushHawk 320D camera support which I picked up the next day at Adorama.  These are two very different solutions, but two products with impressive lineage:  The Fig Rig being the brainchild of writer/director Mike Figgis in conjunction with Manfrotto, and  BushHawk offering stabilization products for many  nature and wildlife photographers.

 

The Fig Rig

 

fig-rig1What do you get when you mount a camera inside a steering wheel?  You get a Fig Rig!! I keep hearing the Joni Mitchell song “Big Yellow Taxi” every time I think about the Fig Rig!  People may find the concept of walking around holding a “steering wheel” in front of you, strange but I have to tell you it works.  The Fig Rig offers incredible freedom of movement.  The two handed navigation if you will, results in tremendous stability and smooth shooting.  The body acts as the shock absorber and does not transfer the jarring movement to the Fig Rig.  The wheel itself can accommodate add on’s such as video lights or a microphone using the optional Fig Rig clamp.

 

The Fig Rig is made of aluminum with padded hand grips.  You attach the supplied quick release mounting assembly to the frame and plate to the camera and you are essentially ready to roll.  Also supplied are 4 cable clips which allow you to manage any wires for accessories you might attach to the frame.  You are looking at somewhere in the vicinity of 2 pounds before you add the camera.

 

The biggest drawback with the Fig Rig is the fact that it is impossible to place the camera down in a stable position when it is mounted.  I find myself removing the camera from the cross bar when it is not in use (perhaps some sort of surface brace or stand can address this.)  The other possible drawback is that you do look a bit weird walking down the street with one.  But to those worried about how they look, I say get over it!  The price of admission:  $299.

 

The BushHawk 320D

bushhawk1The other product that I found myself very excited about is the BushHawk 320D Shoulder Support System.  If you think steering wheel with the Fig Rig, think shotgun with the BushHawk!  This shoulder based stabilizing system is what is called gun mount with a trigger which with the appropriate cable release will “fire” the shutter.  Now one of my big concerns about taking this thing out and using it on the streets of New York is that someone is going shout “gun” (as Clint Eastwood in “In the Line of Fire” does in a crowd) and wrestle me to the ground!! 

 

 

The 320D Pro Kit (one of two Canon versions and there is a Nikon version as well) I purchased included:

 The 320D double handle stabilizer with trigger and shoulder pad; Canon shutter release cord; Quick   release assembly and wrenches; Window Pod;  Strap; Release cord case; and Storage bag.

 

bushhawk2The 320D is a modular thermoplastic frame which is extremely light and strong.  An adjustable arm, which has a shoulder pad at the end slides into the main frame, and is locked into place by tightening a knob.  While BushHawk advertises the product with both hand grips in the same plane, I  loosened the front hand grip and rotated it 90 degrees (as pictured to the left,) which gave me   better balance and  greater stability while shooting video. 

 

 

 

 

One of the biggest plusses for the BushHawk 320D is that with the cable release cord attached, you can effortlessly capture stills while shooting video with the 5D MarkII via the trigger button. I also found the BushHawk worked well for normal viewfinder shooting, live view shooting or video.  If there is a negative associated with the 320D, for some people it will undoubtedly be  having the shoulder pad braced against them.  It does take a little getting use to. The price for all this at Adorama was $212.

 

Whether you go with either of these systems, or with another, the stabilizer is only part of the equation.  The other part of the success of any of these systems depends on you and your ability to hold and move with  the product of your choice.  For me, a heel toe combination seems to work best for removing variability from my stride under most circumstances when moving with either of these stabilizers.  I urge anyone buying a stabilizer to practice moving and finding their own “right” stride.  And don’t forget about picking up a light set of weights to get your shoulders and arms into shape.  You will thank me for this advice!

 

In Part 3 of this series, I will be looking at  the Bruce Dorn U Boat Commander.  I have elected to talk about this system independently because unlike the Fig Rig and the BushHawk, both of which I purchased, the U-Boat commander is on loan for evaluation purposes. Also unlike many of the available solutions, the U Boad commander was developed specifically for use with the 5D Mark II.

 

 

Early last August, I had an opportunity to shoot wedding pictures for a couple in New York’s Central Park.  As my assistant and I were walking a few hundred feet behind the happy couple, and I looked at them leaning into each other as we moved to another location, I remarked how we were witnessing a video moment!  The problem was that I had no video camera:  Just two dslrs, one a Nikon and the other a Canon.  Just a few short weeks later,  Nikon and Canon announced the D90 and the 5D Mark ll respectively, both of which would have high definition video capability, and in many respects will alter the feature set of still cameras going forward.

 

Now the reaction to video in dslrs has been mixed to say the least.  Some people both professional and enthusiast, embrace it, and others call it a gimmick.  Funny, I think back to only a few short years ago when Olympus put a dust shake system, and live view in their cameras.  Features which many marginalized then have become the expected norm today.

 

After experiencing that “Ah Ha” moment in Central Park last August, I am happy that I now have the option to shoot a little video and stills in a single package.  We do live in a multimedia age.  With the rise of YouTube, Vimeo, social networking and image sharing sites such as My Space and Flicker, as well as commercial product advertisement and news sites, the importance of video capture capability in any imaging device, should not be lost or minimized.

 

These hybrid cameras, as I refer to them, are not meant to replace dedicated hi def video cameras nor are they intended to shoot a box office blockbuster; but for clips and  even shorts, they are indeed valuable and intriguing tools.  I can tell you in shooting with both available options, that there are things I like about both and things which I don’t care for!  Each manufacturer could learn a thing or two from how the other has incorporated the video feature for future refinement.  The most important thing for those of us who are embracing the feature is to learn how the system of our choice operates and to exploit it to the fullest. What is clear is that the technology will develop and develop rapidly. A year or two from now the amount of control and flexibility in shooting speed will make today’s groundbreakers seem crude.  But for now I encourage all who have purchased them to enjoy the feature.

Coming next week – Part 2:  Mounting the Hybrid Camera for Movement

 

Resources for learning more on shooting video with dslrs:

http://www.usa.canon.com/dlc/controller?act=GetArticleAct&articleID=2186
 
http://cpn.canon-europe.com/content/masterclass/eos_5d_mark_II_masterclass.do
 

 

rear view-d90-left-5d2-right